MEKP Catalyst Hardener For Resins and Gelcoat

This Is a Bottle of Clear Activator, MEKP (Methyl Ethel Ketone Peroxide) Also Known As MEK-P. It Is Used For Hardening, Activating, And Curing Polyester Resins, Vinyl-ester Resins, Hybrid Resins (normally a blend of Polyesters (pe) Vinyl Esters (ve) And Epoxies), and Gelcoats. This Is A General Purpose Use MEKP.

MEKP (Methyl Ethyl Ketone Peroxide) Is A Catalyst Used In The Composites Industry For Polyester And Vinyl Ester Resins And Gel Coats. It reacts with the resin to turn it from a liquid to a solid (cure it). It is used in varying ratios, generally use around 1%-3%, depending on the product being used.

Each Resin Product Is Available As A Kit With A Sufficient Of Amount Of MEK-P. However, MEK-P May Be Purchased Individually, As Shown Here.

MEK-P is an Organic Peroxide and should:
⬛ Always Be Handled With Care, Using the Appropriate Personal Protective Equipment.
⬛ Used For Hardening, Activating, And Curing Polyester Resins, Vinyl-ester Resins, Hybrid Resins
⬛ MEKP Methyl Ethyl Ketone Peroxide Hardener Catalyst

Processing:
The amount of hardener is thoroughly stirred to avoid streaking and to ensure a uniform through-hardening. When mixing, care should be taken to ensure that no air is introduced. At low temperatures, the action of the hardener decreases strongly so that a processing temperature of 18 °C should not be exceeded. A resin/hardener mixture is only storable for a short time. Please note the details of the respective polyester. If the resin accelerator is to be added, it must be mixed before the hardener.

Attention! Danger of explosion! Avoid contact between accelerator and hardener! The quantities are then thoroughly stirred in succession!